BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

$272.47

Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it’s designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details). Paint Sub-Category: Primer, Shellac-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.

100 in stock

Age Recommendation: Ages 16 and Up
Applicable Surface Material: Cement; Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood
Application Method: Brush; Roller
Application Temperature Range: 0º and 90ºF
Binder/Vehicle Ingredient(s): Shellac
Color Family: White
Color(s): White
Cure/Dry-Time Range: 20 min (Touch); 45 min (Handle, Re-Coat); 1-3 Days (Full Cure)
Diluent/Solvent Ingredient(s): Denatured Alcohol; Water
Disclaimer Statement: B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Finish/Sheen: Flat
Footnote 1: Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2: Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Global Product Type: Building/Construction Paints & Primers
Intended Application Environment: Interior/Exterior
Maximum Coverage Area: 500 sq ft
Packaging Type: Bucket/Pail
Paint Sub-Category: Primer, Shellac-Based
Post-Consumer Recycled Content Percent: 0%
Pre-Consumer Recycled Content Percent: 0%
Product Biodegradability Indicator: N
Product Compostability Indicator: N
Recommended Level of Ventilation: Moderate
Total Recycled Content Percent: 0%
Volume Capacity: 1 gal
 

Additional information

 
Weight 21.59 lbs
Dimensions 7.00 × 8.00 in

Reviews

There are no reviews yet.

Be the first to review “BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton”

Your email address will not be published. Required fields are marked *